Separation of Photosynthetic Pigments by High-performance Liquid Chromatography: Comparison of Column Performance,Mobile Phase,and Temperature

High-performance liquid chromatography (HPLC) has been commonly used as method of separating and identifying photosynthetic pigments such as chlorophylls and carotenoids because of such advantages as speed, high resolution and sensitivity. In this technique, high separation relies largely on the type of column material. This study compared the efficiency of five reverse-phase columns, C8, C18, C18 monolithic, π-NAP, and cholester, for separation of photosynthetic pigments at several fixed conditions of mobile phase and temperature. This investigation also analysed the parameters of Δt_R and t_R ratio for selected pigments and resolution for structural isomers, such as α- and β-carotene. Among above columns tested, cholester column is suitable for separation of pigments not only for a broad range of polarity, but also for hydrophobic pigments in a simple mobile phase. This finding can help in the selection of column and HPLC parameters in separating photosynthetic pigments.     

柱切换液相色谱法快速定量检测参附注射液中乌头碱类生物碱和人参皂苷

利用柱切换液相色谱,建立了参附注射液中苯甲酰新乌头原碱、苯甲酰乌头原碱、苯甲酰次乌头原碱、新乌头碱、次乌头碱和乌头碱6种乌头碱类生物碱,以及Rg1、Re、Rf、Rb1、Rc、Ro、Rb2、Rb3、Rd 9种人参皂苷的分析方法。首先利用强阳离子交换的在线固相小柱选择性富集和净化样品中生物碱类成分,优化了色谱条件;并采用EC－C18柱作为人参皂苷的分析柱,通过优化实验条件,结合柱切换方式,去除了样品中辅料等大极性基质成分对色谱柱的污染,实现了生物碱分析和人参皂苷分析的自动切换。结果显示,样品中的生物碱和人参皂苷分离良好,线性相关系数（r2）均大于0.999,连续进样精密度的相对标准偏差（RSD） < 2.0%,重复性的RSD < 2.0%;其中6种生物碱的平均回收率为95.1%～98.6%,检出限为4.0～8.2 ng/mL;9种人参皂苷的平均回收率为91.7%～104%。所构建的基于柱切换液相色谱技术的在线固相萃取方法能够有效去除样品中的基质干扰,快速完成参附注射液中3种单酯型生物碱和9种人参皂苷的快速定量,同时也可对3种双酯型生物碱进行限量检测,可应用于药物的质量评价。     

Fire retarded polyurethane foam composites based on steel slag/ammonium polyphosphate system: A novel strategy for utilization of metallurgical solid waste

A series of FR-RPUF composites were prepared by a one-step water foaming process with ammonium polyphosphate (APP) and steel slag (SS) as flame retardants. Thermogravimetric analysis (TG), limiting oxygen index (LOI), UL-94 vertical combustion test, microscale combustion calorimetry (MCC), TG-Fourier transform infrared spectrometry (TG-FTIR), scanning electron microscopy (SEM), Raman spectra and FTIR were used to investigate the thermal stability, flame retardancy, combustion performance, gas phase products, and char residue morphology of FR-RPUF composites. TG test results showed that the initial decomposition temperature (T_-5wt%) and char residue rate at 700°C of RPUF/APP/SS composites were significantly enhanced by the addition of APP and SS, and the thermal stability of the composites was improved. Flame retardant test results confirmed the significantly increased LOI values of RPUF/APP/SS composites with V-0 rating. TG-FTIR also confirmed the obviously decreased release of toxic gases and flammable gases in the combustion of RPUF/APP/SS composites. SEM and Raman spectra of char residues for the composites suggested that APP/SS system improved the compactness and graphitization degree of char layer for RPUF/APP/SS composite. The above researches provide a new strategy for the utilization of SS in fire safety engineering.     

Characterization of a highly stable zwitterionic hydrophilic interaction chromatography stationary phase based on hybrid organic–inorganic particles

We have characterized a sulfobetaine stationary phase based on 1.7 μm ethylene-bridged hybrid organic–inorganic particles, which is intended for use in hydrophilic interaction chromatography. The efficiency of a column packed with this material was determined as a function of flow rate, demonstrating a minimum reduced plate height of 2.4. The batch-to-batch reproducibility was assessed using the separation of a mixture of acids, bases, and neutrals. We compared the retention and selectivity of the hybrid sulfobetaine stationary phase to that of several benchmark materials. The hybrid sulfobetaine material gave strong retention for polar neutrals and high selectivity for methyl groups, hydroxy groups, and configurational isomers. Large differences in cation and anion retention were observed among the columns. We characterized the acid and base stability of the hybrid sulfobetaine stationary phase, using accelerated tests at pH 1.3 and 11.0, both at 70°C. The results support a recommended pH range of 2–10. We also investigated the performance of columns packed with this material for metal-sensitive analytes, comparing conventional stainless steel column hardware to hardware that incorporates hybrid surface technology to mitigate interactions with metal surfaces. Compared to the conventional columns, the hybrid surface technology columns showed a greatly improved peak shape.     

In-situ grown metal organic framework synergistic system for the enantioseparation of three drugs in open tubular capillary electrochromatography

Metal organic frameworks have received great attention as the chiral stationary phase for racemic drug separation because of their fascinating structures and properties. However, the most homochiral metal organic frameworks were constructed by rare and precious chiral organic ligands. In this work, an achiral metal organic framework, together with a natural chiral selector carboxymethyl β-cyclodextrin built a synergistic separation system in the open tubular capillary electrochromatography. The novel coated columns were developed by inducing metal organic framework nanoparticles to grow on the imidazolyl functional capillary inner wall. The baseline separations of hydroxychloroquine, ofloxacin, and atenolol were achieved in the synergistic separation system. The effects of the concentration of chiral selector, pH, voltage, and the concentration of organic additives were studied. Compared with chiral selector auxiliary bare capillary, the resolutions of three drugs were remarkably improved. The relative standard deviations for the retention time of intraday (n = 6), interday (n = 6), and column-to-column were less than 2.1, 2.6, and 5.2%, respectively. These results demonstrate that affordable synergistic separation systems are prospective for racemic drug enantioseparation in capillary electrochromatography.     

A combined computational & electrochemical exploration of the Ammi visnaga L. extract as a green corrosion inhibitor for carbon steel in HCl solution

Natural-based corrosion inhibitors have gained great research interest thanks to their low cost and higher performance. In this work, the chemical composition of the methanolic extract of Ammi visnaga umbels (AVU) was evaluated by gas chromatography (GC) coupled with mass spectrometry (MS) and applied for corrosion inhibition of carbon steel (CS) in 1.0 mol/L HCl using chemical and electrochemical techniques along with scanning electron microscope (SEM) and theoretical calculations. A total of 46 compounds were identified, representing 89.89% of the overall chemical composition of AVU extract, including Edulisin III (72.88%), Binapacryl (4.32%), Khellin (1.97%), and Visnagin (1.65%). Chemical (Weight loss) and electrochemical (potentiodynamic polarization curves (PPC), and electrochemical impedance spectroscopy (EIS)) techniques revealed that investigated extract can be used as an effective corrosion inhibitor for carbon steel in 1.0 mol/L HCl solution. At a low dose of 700 ppm, the inhibitory action of AVU extract reached an inhibition efficiency of 84 percent. According to polarization tests, the investigated extract worked as a mixed inhibitor, protecting cathodic and anodic corrosion reactions. The EIS test showed that upon the addition of AVU extract to HCl solution, the polarization resistance increased while the double layer decreased. SEM images showed a protected CS surface in the inhibited solution. Quantum chemical calculations by Density Functional Theory (DFT) for the main components confirmed the major role of heteroatoms and aromatic rings as adsorption sites. Molecular dynamics (MD) simulation was used to study the adsorption configuration of the main components on the Fe(1 1 0) surface. Outcomes from this study further confirmed the significant advantage of using plant-based corrosion inhibitors for protecting metals and alloys.     

Anti-corrosion and anti-microbial evaluation of novel water-soluble bis azo pyrazole derivative for carbon steel pipelines in petroleum industries by experimental and theoretical studies

In this research, we investigated the synthesis of a novel water-soluble bis azo pyrazolin-5-one (ABP) which was synthesized efficiently via the regioselective reaction of hydrazine with coumarin hydrazone (CMH). Also, we evaluate their anti-corrosion and anti-bacterial behavior. The inhibition efficiency of ABP in an acidic medium (1.0 M HCl) was evaluated using various electrochemical and surface morphology measurements. The novel bis pyrazole-based azo dye ABP (16 × 10^?6 M) demonstrated a higher protection capacity (93.3 %). Tafel curves revealed that ABP was a mixed-type inhibitor. The adsorption of ABP on the C-steel (CS) surface is proven by the alteration in (R_ct and C_dl) impedance characteristics and obeyed the Langmuir isotherm model. SEM/EDX, AFM, and XPS surface examinations confirmed the enhancement of an adsorbed film protects the CS surface from acid corrosion at the appropriate dose. Furthermore, theoretical calculations using DFT and MC simulations were performed to identify the active sites on ABP molecules in charge of the adsorption and surface protection of the CS. The adsorption of bis pyrazole-based azo dye on the metal surface explained the protection mechanism. Moreover, the ABP screened for its antimicrobial activity against sulfate-reducing bacteria (SRB), and the calculated inhibition efficiency was 100 %. The current work presents significant results in manufacturing and producing novel water-soluble bis pyrazole-based azo dye derivative with high anti-corrosion and anti-microbial efficiency.     

酰胺修饰杂化硅胶整体柱的制备及其在莱克多巴胺检测中的应用

以氧化琼脂糖（AG）和四甲氧基硅烷（TMOS）为前驱体,通过溶胶－凝胶法制备 AG/SiO2整体柱,利 用酰胺化反应对整体柱进行酰胺基团修饰。通过X射线光电子能谱（XPS）、傅里叶变换红外光谱（FTIR）、N2 吸附－脱附和扫描电镜（SEM）等表征手段对所制备材料的结构和形貌进行分析。结果显示酰胺基团被成功修 饰至整体柱,该材料具有良好的通透性及较大的比表面积。以其为固相微萃取介质对羊肉中的莱克多巴胺进 行萃取富集,在优化的样品前处理条件下,采用基质添加标准曲线法,结合高效液相色谱－紫外（HPLC－ UV）检测,建立了羊肉中痕量莱克多巴胺的分析方法。该方法在 1. 94～1 170 ng/g范围内线性良好,相关系 数（r 2 ）为 0. 993 1,检出限（LOD）和定量下限（LOQ）分别为0. 618、1. 94 ng/g,3个不同加标水平下样品的平均回 收率为86. 6%～103%,相对标准偏差（RSD,n = 5）为4. 8%～7. 3%。该方法具有检出限低、回收率高、样品用 量少等特点,可用于羊肉中痕量莱克多巴胺的灵敏检测。     

Co3O4 Decorated Ti/TiO2 Nanotubes for Photogenerated Cathodic Protection of 304 Stainless Steel

The Co₃O₄ decorated TiO₂ nanotube arrays(NTAs) coatings are fabricated by the combination of anodization and impregna-ting methods. It is found that the introduction of Co₃O₄ can reduce the diffraction intensity of (101) plane of the TiO₂ and accelerate the separation of photogenerated electron/hole pairs. In addition, the open circuit potential(OCP) and the corrosion potential of 304 stainless steel(304SS) with or without Co₃O₄ decorated TiO₂ NTAs were measured under visible light, which indicated the 304SS coupled with Co₃O₄ decorated TiO₂ NTAs had better anticorrosion performance than that of the 304SS or the 304SS coupled with pure TiO₂ NTAs. The enhancement of the cathodic protection performance of the Co₃O₄ decorated TiO₂ NTAs can be ascribed to the matched energy levels and strong interaction between Co₃O₄ and TiO₂ NTAs, and the improvement of light absorption.     

金属有机框架CPL-1填充柱气相色谱分析氢同位素

金属有机框架(MOFs)材料CPL-1的比表面积大、孔径均一,在低温条件下对氢同位素具有良好的量子筛分效应,是气相色谱固定相潜在的应用材料。采用CPL-1填充制备了长0.5 m、内径1 mm的微孔填充柱,借助单晶Al_2O_3颗粒间隙构建了色谱载气流通路径,在低温条件下探索研究了CPL-1填充柱的氢同位素分析性能。结果表明,在77 K时CPL-1对H_2和D_2的吸附量接近4 mmol/g,优于MnCl2/γ-Al_2O_3和γ-Al_2O_3,CPL-1填充柱在取样量0.25~2 mL范围内对低浓度氢同位素样品的检测具有良好的线性关系,检测的相对误差小于4%。CPL-1填充柱具有线性范围宽、重复性好、准确度高等优点,在氢同位素色谱分析中具有潜在的应用价值。